Výkonový ovládač ECP 300 VD CR (3,5-5A) Pego

TECHNICAL CHARACTERISTICS		ECP 300 EXPERT VD 4		ECP 300 EXPERT VD 7
Box dimension		400 x 300 x 135 mm		400 x 300 x 135 mm
Weight		9 Kg		10 Kg
Protection rating		IP 65		IP 65
Power supply (3PH + N + E)		400 V AC ±10% 50/60 Hz		400 V AC ±10% 50/60 Hz
Load type		Three-phase		Three-phase
Working temperature		-5 ÷ +40°C		-5 ÷ +40°C
Storage temperature		-25 ÷ +55°C		-25 ÷ +55°C
Relative ambient humidity		30% - 90% Rh without condensate		30% - 90% Rh without condensate
Range of reading		-45 ÷ +99°C		-45 ÷ +99°C
Main switch - general protection		4 poles magnetothermic 16A		4 poles magnetothermic 25A
Compressor protection		Motor circuit breaker		Motor circuit breaker
Control		PEGO		PEGO
Defrosting		Electrical		Electrical
Status indicators		Led + Display		Led + Display
Alarm signals		Led + Buzzer		Led + Buzzer
INPUTS
Ambient probe		NTC 10 KΩ		NTC 10 KΩ
Evaporator probe		NTC 10 KΩ		NTC 10 KΩ
Door switch		PRESENT		PRESENT
High/low pressure switch		PRESENT		PRESENT
KRIWAN® connection		PRESENT		PRESENT
Compressor functioning mode selection		Pump Down - Thermostat		Pump Down - Thermostat
OUTPUTS
Compressor		370 W ÷ 3000 W (0,5 ÷ 4 HP)		3000 W ÷ 5500 W (4 ÷ 7,5 HP)
Condenser fans output 1		800 W (1PH)		800 W-----(1PH) total-------(1PH)
Condenser fans output 2 (separated)
Evaporator fans		500 W (1PH)		2000 W (3PH) or 1500 W (1PH)
Defrosting heaters		6000 W (AC1) Eq. resistive load		9000 W (AC1) Eq. resistive load
Room light		800 W (AC1) - Resistive load		800 W (AC1) - Resistive load
Solenoid valve		PRESENT		PRESENT
Compressor oil heater		PRESENT		PRESENT
2 Configurable relays		PRESENT		PRESENT
Supervision system		TELENET / MODBUS-RTU		TELENET / MODBUS-RTU